Piddle Fartin’ With Old Tools Again

What can I say, it keeps me out of the taverns.

Todays episode has us cleaning up a Barnes #2 Pipe Cutter that was in the huge pile of crap I got from Old Grumpy across the street a while back.

This thing was freakin’ NASTY.

That’s after a preliminary cleaning just so I could evaluate it.

Notice you can kind of see daylight in between those cutter wheels?

Yeah, the whole head was jammed COMPLETELY SOLID with at least eighty years worth of dirt, rust and dried out grease.

I literally had to dig it out with picks and little screwdrivers.

An overnight soak in EvapORust helped soften it all up and made it easier to get out.

It was really, really bad.

If I had to guess the thing hadn’t been used in at least fifty years judging by the condition and it’s location at the bottom of a box full of other rusty junk tools I have yet to do anything with.

After I finally got it cleaned up I started looking it over and found this mess.

So I got on Teh Google and did a quick search. That led me to the Vintage Machinery website where Keith Rucker has a searchable data base for old tools and machinery.

That thing is a huge repository of almost impossible to find information about this old stuff.

Near as I can tell, these things were first Patented clear back in 1883.

Looking closely at the stamping on this thing, I see an 1884 date.

Either way, this Pipe Cutter is more than likely way, way over 100 years old.

I’m betting it was Old Grumpy’s Father’s.

Hard to say, Chuck is 86 years old himself now but this is 2022.

That means he was born clear the hell back in 1936 according to my handy Calculus Translator.

Depending on when it was actually sold, it could be fifty years older than he is.

But it actually cleaned up pretty good and I’m sure it would cut pipe just fine.

I put some Never Seize on the threads and sprayed it down with WD-40 after I got it back together. Now it is going in the bottom of one of my tool boxes against the long odds that I will ever need to use it but at least I know it didn’t wind up in the scrap barrel where he was going to dump it.

Taken with glee from drjim at Every Blade of Grass

Chevy’s New “LT-6” DOHC V8 Is A Nuclear Warhead For The Z06 Corvette!

 DOHC, 4 valves-per-cylinder, Flat Plane Crankshaft, 8600RPM redline, and Six-Hundred Seventy Horsepower from 333 Cubic Inches……..astounding.

No superchargers or turbochargers; This is pure, Naturally Aspirated, RPM-driven, Horsepower.

Read all about it here in Don Sherman’s great article.

What a monster, wouldn’t mind putting that in my Chevy pick up….

From Big Country News. H/T to Deathray

Idaho, Oregon and Alaska all Speaking out Against Proposed tax on Fuel by Washington State

  • By Ted O’Neil | The Center Square contributor
    thecentersquare.com
  • Feb 21, 2022 Updated 6 hrs ago
Gas pumps

BOISE – Elected officials in Idaho, Alaska and Oregon are speaking out about proposed legislation that would impose a tax on diesel and gasoline fuel that is shipped from Washington state across state lines.

Idaho Gov. Brad Little has called out Washington on the tax.  In a Twitter post, Little stated, “The State of Washington is at it again – trying to tax Idahoans unfairly. AG Wasden and I called on WA Governor Jay Inslee to step in and stop the state’s attempts to increase the cost of fuel for Idahoans and citizens of other Western states.”  Little and Wasden sent a letter to Inslee last week expressing concerns over the proposed tax.

Part of a four-bill package introduced earlier this month would place a tax of 6 cents per gallon on fuel coming from refineries along the Puget Sound that is sent to Alaska, Idaho and Oregon. There are no refineries in Idaho or Oregon and only one in Alaska.

In a speech on the House floor Thursday in the Alaska Legislature, Rep. Kevin McCabe, R-Big Lake, said he would draft legislation involving taxes and the commercial fishing industry in response.

The first would levy a tax of 6 cents per pound for fish caught in Alaska, above and beyond the current landing tax. It would apply to all fishing boats, but those owned by Alaskan companies could apply for a tax credit.

The second would levy a tax of 6 cents per foot on fishing boats moored in Alaska, while those owned by Alaskan companies could also apply for a tax credit.

The move is seen as targeting fishing boats from Washington state that operate in Alaskan waters.

“Frankly, I’m tired of being thought of as a Washington colony,” McCabe said. “I’m tired of them taxing us and depending on us for their needs.”

Oregon Gov. Kate Brown said on Twitter Thursday that she spoke with Washington Gov. Jay Inslee and “made it very clear that Washington taking unilateral action to increase gas prices for Oregon families and businesses is unacceptable. Washington leaders should know that their action will impact Oregonian’s lives. Continued collaboration between our states will always lead to better outcomes for both Washington and Oregon.”

Two members of the Oregon State House also spoke against the legislation Thursday during a virtual meeting of the Washington State House Transportation Committee.

“This is an offensive proposal that would force Oregonians to pay for Washington’s infrastructure projects,” said Rep. Shelly Bohart Davis, R-Albany. “I cannot stand by and watch as the hardworking people of Oregon are hit with an unfair and unjust tax with zero representation.”

Rep. Brock Smith, R-Port Orford, said the issue highlights “poor policymaking” in Washington.

“The Washington Legislature set goals and approved projects they couldn’t afford,” he said. “Instead of doing a better job writing public policy, they’re going to ask my residents to pay for their roads when they have never nor will ever use them.”

Canadians Attempt To Shut It All Down

This will Bring The Pain.

Basically you don’t have to do a damn thing, that’s the whole point.

Sit back and watch the ripple effect do the work for you.

I’m thinking some truckers here in the Former United States need to take a pointer from this instead of driving into a trap of their own making.

https://rumble.com/embed/vsopyf/?pub=h3q39