Compared to the snot they called paint stripper in the past?
Oh Hell yes I want some of this!
I have to get ready to go to work and don’t have time to try and find out what this stuff is.
Mebbe later.
These people have no imagination.
Holy shit Daddy Want.
Maybe I’ll try a different corner later.
Mechanicangelo
If the Joe Chi Minh administration goes through with their threats to dishonorably discharge a hundred thousand or so Military personnel because they refuse to get jabbed then I can see about a hundred thousand highly trained and highly motivated people who are going to have A VERY SERIOUS HARD ON for any and all things Biden related.
If that indeed does happen, I would like to be able to welcome them to The Resistance.
You gotta know someone’s ass cheeks are gonna slam together when they finally figure out what they have just done.
Hopefully by then whoever it was who thought this was such a great idea will already be well on their way to the bowels of the Arctic to spend the rest of their life.
Who in their right mind thinks any organization anywhere on this planet is going to continue to function without a hundred thousand little cogs keeping the gears turning?
Even better, piss all those little cogs off like they have never been pissed off before in their entire lives and then just cut them loose?
As Andy Griffith used to say.
Hoo Doggy!
ADAM BEAM Sat, October 9, 2021, 5:52 PM·2 min readIn this article:
SACRAMENTO, Calif. (AP) — California will soon ban the sale of new gas-powered leaf blowers and lawn mowers, a move aimed at curbing emissions from a category of small engines on pace to produce more pollution each year than passenger vehicles.
Gov. Gavin Newsom signed a new law on Saturday that orders state regulators to ban the sale of new gas-powered equipment using small off-road engines, a broad category that includes generators, lawn equipment and pressure washers.
The California Air Resources Board has already started working on a rule to do this, a lengthy process scheduled to conclude early next year. But the law Newsom signed on Saturday removes any doubt, ordering the agency to apply the new rule by Jan. 1, 2024, or as soon as regulators determine is “feasible,” whichever date is later.
Speaking only for myself but I’m sure there are millions of people in the same boat, it’s not like we have a ton of money laying around that would enable us to run down and buy a garage full of new power equipment to have ready to go if we needed something.
Gas powered generators for example, can get real spendy, real quick.
Pressure washers, even a damn lawnmower can run into the hundreds of dollars if you want to buy new anymore.
If they pass this law then they are effectively shutting off a huge market of labor and possibly even life saving equipment.
My plan of attack to counter that shit would first be to say thanks for the warning Chumps, then I would start scouring Craigslist like Hunter Biden picking Parmesan Cheese off the carpet to stuff up his nose.
Either gently used or just for parts, I would literally build a fucking shed just to house the parts to keep what I had going.
If they are going to ban the sale of new machines then you can damn well bet that they are going to try and ban the selling of replacement parts to fix the ones already out there just as soon as they can.
We are talking a Billion dollar a year industry they are going to try and kill because Glowbull Worming or some bullshit like that.
It won’t be long after they pull this shit that a complete, used Briggs and Stratton gas engine will be going for a thousand dollars in the Underground Economy.
Crap like carburetor kits that even right now can be expensive, will become Unobtanium.
God forbid you have a piece of equipment with some Factory Captured part that can’t be found new anywhere, for any price.
There are a lot of one off parts for most of these pieces of equipment.
I would take this as a good time to go through what I already have, stock some spares and start scouring the local area for any machines that have ever been on my Wish List.
If you stop and think about it, what they are proposing is to relegate everyone back to 1850 technology wise, unless there is a battery powered version of a labor saver on the market.
For some reason I don’t recall ever seeing a portable battery powered emergency generator being advertised in recent memory.
Solar Powered shit may be OK for people that live where the sun actually shines but from where I’m sitting, it has been clouded over and raining for the last 3 days.
What they aren’t telling you is that all of these batteries that power all this new crap are considered Toxic Waste.
That will be their next emergency to deal with.
Maybe a nice little steam powered lawnmower would be the ticket.
I’m sure there are tons of people around who know how to operate and maintain that kind of shit.
Right?
Of course you do realize that this is only going to be decreed for you little peons, right?
City, Municipal, County and State maintenance crews are going to be exempt, lest the entire highway system etc. revert back to nature completely.
Oh, and Golf Courses.
The Elite gotta have their putting greens dont’cha know?
And I wonder how many truck loads of batteries it would take for a battery powered chainsaw to go through to cut down and buck up one of these?
No, this is just to beat down on the Proles, pure and simple.
They have already gone after gas powered cars.
You have to know the Green Weinie Morons who are passing these laws are absolutely, 100% disconnected from the every day realities of exactly how Modern Society actually functions.
I have news for these Fucktards, there aren’t any Magic Fairy’s cutting all that grass and knocking down all the brush all over that gigantic state.
Gasoline powered portable labor saving machines were invented and propagated for some very damn good reasons and there are zero practical alternatives on the blackboards anywhere.
Just wait until their yards and lawns are overgrown and Juan tells them to go fuck themselves if they think he is going to be cutting that shit back with a scythe and lopping shears.
I’m tellin’ ya. I have more stupid little projects that I have lined up for myself than I could ever get done in ten years.
But one of them is finally done.
There may be one, maybe two of you guys that have been around long enough without finally saying enough with this moron, who may remember a couple years ago I posted about this weird and I guess very expensive drill press that I found at a local Goodwill for under $15.
$13.50 keeps sticking in my head for some reason.
It looks exactly like this one, except mine has a little work table on it.
I literally had no idea what it really was, I saw it was some kind of weird drill press for under twenty bucks and threw it in the cart.
Um, yeah, about that.
After I got it home and stuffed out in the garage I started looking at it and I’m like what the fuck is this thing?
So I Googled it.
Holy Fuck.
Just this minute, I got on EBay and did a quick search.
For just the parts in the picture below, they are asking three fifty.
An average for all the ones I have seen have been going for about $450-$550.
I did see one they were asking $2400 for but there is always that one guy out there.
Turns out the thing is an Electro Mechanico High Speed, Sensitive Drill Press.
Basically, it’s a Super Charged Dremel motor on a stick.
1,000 to 10,000 rpm, they were advertised as being able to drill a hole smaller than a human hair.
All well and good.
It isn’t like I’m doing that kind of stuff day in and day out but whatever, I guess for under fifteen bucks I’ll keep it just because..
There was one thing about this thing that kept bugging me though.
It didn’t have a whole lot of travel, especially if you were using the table.
Sure, you probably don’t need a bunch when you are drilling needle dick bug fucker tiny assed micro holes but like pResident Poopy Pants says, C’mon Man.
So about eight months ago on one of my trips over to the Metal Supermarket, I ordered up a much longer hunk of 7/8’s round stock with the thought of one day swapping the original short one out.
I finally did just that.
First I had to get the old one out.
That turned out to be a little more difficult than I had imagined it would be.
I wound up having to use a Pitman Arm puller to get the mounting collar off the old shaft.
Then I tested the limits of the inner spindle clearance on my little Combo machine.
That 7/8’s round stock just barely fit through the spindle and the chuck.
All that just to put a small bevel on the end and then I slid it way back in the chuck, mounted a vise under the very end of the bar and used an end mill to spin a little flat spot for the set screw to land on.
After that it was clean up some bores, tappy tap tap with a Copper mallet and install the set screw,
Here’s the old bar up against the new one.
Now it has more than enough travel, there are two Allen head bolts you can loosen up and slide the whole drill motor assembly up and down the bar.
The reason I did all of this is so I could have enough clearance to be able to mount a little Chineseium X-Y table I got off Banggood cheap soon after I bought this thing.
All together including the bar and the table, I have less than a hundred bucks into the thing.
So that little project is done finally.
It can go right back to collecting dust again.
BUT, it won’t be bugging me in the back of my mind every time I happen to see it anymore.
And that, is priceless.
What Do Though?
I am discovering more and more that Trad Americans such as myself are part of a shrinking pool of people who remember what life was like before the year 1990.
Lead by example I guess.
Supposedly there is still some stupid fucking mask mandate around here.
Grog sent me a picture of himself walking through a store without one way North of here earlier just today.
The Wifely Unit and myself both went into two different Wally Worlds this morning without them.
Every day I go to work I stop at a little gas station Quicky Mart type place.
They get my business because they are Traditional Americans and they won’t require them either.
Other than necessary medical and dental visits who are required by the illegitimate Federales to require them, businesses that try to enforce that shit do not get my Fiat Bux.
End of fucking story.
The Jab is a forgone conclusion.
Ain’t Fucking Happening.
Period.
So while there are still way, way too many brain dead motherfuckers in this country who have willingly and even eagerly stepped right up and rolled up their sleeves for that shit, there are still millions of us who didn’t fall for the bullshit
By this time next year I am afraid the culling is going to be in full swing for those who did.
In case anyone is wondering how all of this insanity has profligated throughout our government and our society, look to the CCP.
They have literally taken over our country without firing a shot and 98% of the American people don’t have the faintest clue about it.
They either bought outright or blackmailed the media, the politicians, and wholly own the electoral process.
The plan for all this has been in the works since the late 50’s and has finally come to fruition.
They realized long ago that they weren’t going to be able to feed their people and need our physical country as a giant farm to do it.
Killing us off with The Jab is going to almost fulfill that .
Almost but not quite.
Their crops have failed the last two of three years due to massive flooding.
In 2019 they lost 1/3rd of them.
Last year they lost almost 1/2 of their crops.
This year they are estimated to lose almost a full 2/3’s of their crops.
Right now the CCP is in a race against time.
There is even more rain coming their way.
Either they succeed in killing off enough of us that they can come in and mop up or they face massive revolt at home from their own starving citizens.
Joe Chi Minh and Co, are wholly owned by the Chinese.
Lock, Stock and Barrel.
If you stop and really consider that fact and the ramifications, every insane thing you have seen come to pass in this country in the last 10 months will start making absolute sense.
They are out to destroy America and they need to Fast Track it at this point.
That train needs to jump the tracks pronto.
If you ever even considered yourself to be a Patriot, now would be a very good time to start looking for ways to throw sand in their gears.
There are literally millions of little ways, as many as there are each individual person who has the even tiniest bit of creativity.
God Bless America and God Bless You.
We be in it to win it.
It’s time to get creative and it’s long past time to find a way to say Because Fuck You That’s Why every fucking day to these absolute cretins.
It’s quick but I laughed my ass off.
You know damned good and well this ain’t in this country.
Pretty good smack too.
Out of all of them, she is the one who’s personality got warped the most by me.
I swear the little shit is just as ornery as I am and she has the same wicked sense of humor I do.
This could totally be her, yanking my chain just for fun
CederqX couldn’t get it to post so I had to step in.
